Tarmac RAP Bins specifications
Top Opening | Capacity | Feeder Table |
---|---|---|
6.5’ x 12’ | 18 Tons | 18” |
10’ x 14’ | 30 Tons | 24” |
12’ x 14’ | 40 Tons | 36” |
Assuming 100 lbs/ft3 material
Tarmac rap Bins specifications
Top Opening | Capacity | Feeder Table |
---|---|---|
6.5’ x 12’ | 18 Tons | 18” |
10’ x 14’ | 30 Tons | 24” |
12’ x 14’ | 40 Tons | 36” |
Assuming 100 lbs/ft3 material
Recycled Asphalt Pavement
Tarmac RAP Bins
Tarmac RAP Bins are built standard equipment as follows, whether you need one bin or four:
Bin
- 1/4″ plate tub walls
- Formed plate legs with 48″ Leg Extensions
- Formed top frame
- Two levels of 1/4″ angle iron bracing
- 3/8″ thick T1 plate door with jack
- Cougar B3-3500
- Vibrator mounted on 10″ x 20# channel
- “No-Flow” switch with AR paddle
- Clamp on skirt board flashing
Feeder Table
- 36” feeder table with Precision CEMA B 5″ troughing idlers
- Dodge Type E bearings on head shaft, SCM bearings on tail shaft
- Sumitomo Right hand drive
- Precision 12″ lagged head pulley and winged tail pulley
- 9″ telescopic belt take-ups
- 36″ 3 ply-3/16″ x 1/16″ domestic belting with Flexco 140 Megalloy fasteners
- Tail shafts drilled for tach
- AR lined splash pans
Collector Belt
- 36” collector belt with 12″ reinforced I beam frame with angle cross members and 8″ channel incline conveyor with tubular leg frames
- Precision 5″ 35 degree troughing idlers and return idlers
- 14″ lagged head pulley and 12″ winged tail pulley
- Sumitomo Drive
- Type E bearing on head shaft and SCM wide slot bearings in a 24″ take up
- 36″ 2 ply-3/16″ x 1/16″ domestic belting with Flexco 140 Megalloy fasteners
- Spring tensioned belt scraper
Features for Reliability
Structural supports to spread foundation load
Optional steel bulkhead
24″, 30″ and 36″ wide feeder tables with troughing idlers to reduce splashing
Frequency, eddy current and DC feeder table drives available
Portable, skid mounted, or stationary units
Screen decks & RAP crushers available