Tarmac International, Inc. manufacturers drying and handling systems for coal and biomass and the special considerations they need. Our design and engineering staff will work with you to provide a specific system or individual components determined by the overall objective and characteristics of your feedstock. Systems are designed for your project – to be portable or stationary – and to meet or exceed all safety and electrical standards of each country.
Available components include: conveyors, surge storage, feed bins, dewatering systems, rotary thermal dryers (sometimes called kilns), burners with multi-fuel capability, discharge systems, air pollution control equipment (cyclones and/or baghouses), radial stackers, and system controls.
|ITEM NUMBER||DIA x LENGTH||PRODUCTION||BURNER SIZE||BAGHOUSE|
|SD4.5||4.5′ x 20′||10 to 20 tph||17 btu||10,000 acfm|
|SD5.5||5.5′ x 25′||15 to 30 tph||22.8 btu||11,800 acfm|
|SD7.0||7.0′ x 30′||25 to 75 tph||45 btu||22,125 acfm|
|SD8.5||8.5′ x 40′||75 to 125 tph||60 btu||29,500 acfm|
|SD10||10′ x 40′||150 to 300 tph||115 btu||59,000 acfm|
|SD11||11′ x 50′||300 to 400 tph||170 btu||88,500 acfm|
ASSUMES 6% MOISTURE BY TOTAL WEIGHT, 500 FT/MIN GAS VELOCITY, 220 F MATERIAL DISCHARGE TEMPERATURE, 100 LB/FT3, 500′ ELEVATION.
LOWER MOISTURE LEVELS WILL INCREASE PRODUCTION, HIGHER MOISTURES WILL REDUCE PRODUCTION.